hutton close, crowther ind est, washington, tyne & wear ne38 0ah, england mailto:sales@isocom.uk.com - tel: +44 (0)191 4166546 - fax: +44 (0)191 4155055 circuit features description absolute maximum ratings electrical characteristics similar optocouplers home page IS610, is611 circuit features 5000v isolation fet output low cost dual-in-line package description the IS610 and is611 are optically coupled isolators each consisting of a gallium arsenide infrared emitting diode and a symmetrical bilateral silicon photo detector, mounted in a standard 6-pin dual in line package. surface mount option available. all electrical parameters are 100% tested. specifications are guaranteed to a cumulative 0.65% aql.
absolute maximum ratings (25c) storage temperature: operating temperature: lead soldering: input to output isolation voltage: -55c to +150c -55c to +100c 260c for 10s, 1.6mm from case 2500v (IS610) 5000v (is611) input diode forward dc current: peak forward current: reverse dc voltage: power dissipation: derate linearly: 60ma 3a (1s pw 300pps) 6v 150mw 2.0mw/c above 25c output transistor breakdown voltage: output current: power dissipation: derate linearly: 30v 100ma 300mw 4.0mw/c above 25c individual electrical characteristics input parameter conditions min typ max unit v f forward voltage i f =16ma 1.2 1.75 v i r reverse current v r =6.0v 10 a v r reverse breakdown voltage i r =10a 6.0 v output v (br)46 breakdown voltage i 46 =10a; i f =0 30 v r 46 off-state resistance v 46 =15v, i f =0 300 mohms i 46 off-state dark current v 46 =15v, i f =0, t a =25c 50 na v 46 =15v, i f =0, t a =100c 50 a c 46 capacitance v 46 =0, i f =0, f=1mhz 15 pf coupled parameter conditions min typ max unit r 46 on-state resistance IS610 i f =16ma, i 46 =100a 200 ohms is611 170 ohms r io isolation resistance, input to output v io =500v, note 1 100 gohm c io capacitance, input to output f=1mhz 2.5 pf t on turn-on time i f =16ma, r l =50ohm, v 46 =5v 15 s t off turn-off time 15 s
isolation voltage, input to output IS610 note 1 2500 v is611 5000 v resistance, non-linearity and asymmetry i f =16ma, i 46 =25a rms, f=1khz 0.1 % notes 1. measured with input leads shorted together and ouput leads shorted together. isocom takes great effort to ensure accurate data, but regrettably cannot be held liable for any error on its website. visit file lists to confirm old printouts are up-to-date. contents
|
